GD 3 (out of production)

GD3 can be identified as a rigid base turntable, but technically it is not. The three plinths are formally united in a single body but physically decoupled one from the other by a layer of insulating, anti-vibration material. Each plinth holds one of the main pieces of the turntable ensuring stability in the fixing as well as utmost resilience to the vibrations. We have opted also in GD3 for MDF HD, wood pulp compressed with artificial resins. This material is extremely regular and heavy: its isomorphic composition works much more efficiently than the solid wood.

The turntable pulsating heart is the compact 24VAC synchronous motor whose main feature is its extremely regular rotation, independent from the variations of the mains voltage, given that its speed depends on the mains frequency. The high torque and the rotation speed of 500 rpm actively contribute to the regularity and fluidity of the plate rotation.

GD3 is a set of mechanical parts in action. The largest internal source of noise and vibrations is the motor that must be isolated as much as possible from all other parts of the turntable. The engine insulation in New Horizon turntables is made by an exclusive mechanical suspension system. Through precision steel springs, calibrated on the suspended weight of the motor and the pulley, the oscillation transmission to the plinth is efficiently blocked.

The transmission of the motion to the plate is obtained by a special belt in silicone rubber. The choice of this material ensures the best energy transfer and an excellent decoupling from the vibrations produced by the engine during the operation.

One of the strong points in New Horizon turntables is the plate rotation pivot. The perfection of the movement is the result of a accurate project and several prototypes. Today the piece in production has a sturdy inverted bearing structure in three pieces of aluminum and steel that guarantee the maximum “silence” and a very low rotation friction.

An excellent 9 “straight arm is installed on the GD3 upper plinth. This jewel of the mechanics is based on a double cardan with aluminum barrel, offering all the possible micro-adjustments to fully exploit the characteristics of any head. In addition to the anti-skating and reading weight, provided with three counterweights, it allows to operate both on the azimuth and the vertical alignment of the rod (VTA). The kit is completed by all the tools necessary for its adjustment.

The appearance is extremely important: GD3 hosts a magnificent 25mm thick plate, in Crystal Methacrylate, first laser cut and then worked on precision lathe. This material with a high specific weight combines the excellent ability to disperse the vibrations kinetic energy, to the elegance of a perfect transparency.

New Horizon turntables are interfaced in the best way with all your electronics. An excellent insulating material plate accommodates the gold-plated RCA output terminals and the separate earth connector.

Arm, head, plate and all the other mechanical parts need to be protected when not in use. The high-quality, heat-bent cover in Crystal Methacrylate excellently performs this function, giving GD3 a solid protection and a prestigious appearance.