202i

The rigid base is doubled in 202i. This allows an even more efficient decoupling of the motor (bigger source of self-generated vibrations) from the arm and the cartridge that is able to read the music only in the grooves of the vinyl with a very low background noise caused by the spurious vibrations. The constructive material is the same: compressed wood pulp and artificial resins, known as HDF. This material is extremely smooth and heavy and its isomorphic composition works much more efficiently than the solid wood.

The turntable pulsating heart is the compact 24VAC synchronous motor whose main feature is its extremely regular rotation, independent from the variations of the mains voltage, given that its speed depends on the mains frequency. The high torque and the rotation speed of 500 rpm actively contribute to the regularity and fluidity of the plate rotation.

202i is a set of mechanical parts in action. The largest internal source of noise and vibrations is the motor that must be isolated as much as possible from all other parts of the turntable. The engine insulation in New Horizon turntables is made by an exclusive mechanical suspension system. Through precision steel springs, calibrated on the suspended weight of the motor and the pulley, the oscillation transmission to the plinth is efficiently blocked.

The rotation motion is impressed on the platter by a transmission belt. The best possible solution was the use of silicone which ensures the most effective energy transfer and has an excellent durability. The one-piece mould belt is so thin that it concretizes the “zero feedback”, virtually decoupling the platter from the vibrations produced by the motor during operation.

One of the Plus Points of the New Horizon turntables is the plate rotation pivot. The perfection of the movement is the result of an accurate project and several prototypes that led to the design of an inverted bearing architecture in three pieces. The supporting structure in chromed steel supports a sphere, which in 200’s is made of steel, immersed in an oil bath. The aluminum cap holds the plate and ensures maximum “silence” with a very low friction rotation.

The upper plinth houses the brand new 9″ NH98 straight arm. The movement of this jewel of mechanic is based on four high precision radial bearings. The arm is a sandwich of Nylon and Aluminum worked to break down the resonances and dampen the section dedicated to the counterweight. In addition to the truly progressive proprietary Anti-Skating, it offers all the micro-adjustments possible to take full advantage of the characteristics of any cartridge from Azimuth to Vertical Tube Alignment (VTA). The choice of accessories is completed by the tools necessary for its adjustment also by a handy sling bar.

The elegance of perfect transparency: on New Horizon turntables there are only plates in Crystal Methacrylate, laser-cut and finished at the precision lathe. In the 200 series the plate is 20mm thick and thanks to its high weight and homogeneous structure, it retains more kinetic energy to the advantage of regular rotation.

New Horizon turntables are interfaced in the best way with all your electronics. In particular, the 200 series is equipped with two separate terminals for power and audio signal, to effectively isolate the delicate connections that carry the musical message from the cartridge. A robust plate holds high-quality gold-plated RCA output terminals and a separate ground connector.

The New Horizon 5030RD feet enhance the sonic characteristics of any hifi device by providing better vibration and resonance isolation.
They are made of Delrin®, steel, low density natural rubber and HQR compound (Hard Quiet Rubber), cleaning the system from spurious vibrations, noticeably improving the acoustic scene, detail and three-dimensionality.